Submersible Pump Direct Kaise Chalaye? | Single Phase Submersible Connection Without Control Box In this video, we show you how to connect and test a single-phase 3-wire submersible pump motor directly without using a starter control box. If your starter box is damaged or you need to test the motor directly at a site using a capacitor, this step-by-step wiring guide will show you exactly how to identify the Red, Yellow, and Blue wires. ⚠️ WARNING: This method is only recommended for emergency troubleshooting or temporary testing. Running a submersible pump long-term without an Overload Protector (OLP) or proper starter box panel can burn out your motor. Always use proper safety gear when working with 230V AC power. 📌 What You Will Learn in This Video: How to identify Common, Starting, and Running wires (R-Y-B) How to connect a single-phase capacitor directly to the pump How to run a submersible motor without a control box panel Safety tips to prevent motor burnout during direct testing ⏱️ Video Timestamps: ​⏱️ 9-Second Fast Guide: ​0:01 - The 3 Wires (Red, Yellow, Blue) ​0:04 - Capacitor Connection ​0:07 - Main Power & Test! 🔧 Equipment Used/Tech Specs: Single Phase Submersible Pump (3-Wire) Run Capacitor (As per motor HP rating) 230V Single Phase AC Supply If you found this video helpful, please don't forget to LIKE, SHARE, and SUBSCRIBE for more practical electrical tutorials and DIY engineering tips! #SubmersiblePump #ElectricalEngineering #MotorWiring #SubmersibleStarter #DIYElectrical #InductionMotor ☝️ ☝️ ☝️ #📚एजुकेशनल ज्ञान📝 #💼कंपनी की जानकारी📂 #🤔Reasoning✍ #🙄फैक्ट्स✍ #👨‍🏫️स्किल डेवलपमेंट👔