Brief Explanation: How to Perform Wheel Alignment Wheel alignment is the process of adjusting the angles of the wheels so that they are set to the manufacturer’s specifications. Proper alignment ensures the vehicle moves straight, improves tyre life, and enhances driving stability. Step-by-Step Procedure 1. Inspect Tyres and Suspension ◦ Check tyre condition, pressure, and wear. ◦ Inspect suspension parts like ball joints, tie rods, and bushings for damage or looseness. 2. Place the Vehicle on an Alignment Machine ◦ The car is driven onto a wheel alignment machine or ramp. ◦ Sensors or targets are attached to each wheel. 3. Measure Current Wheel Angles ◦ The machine checks three main angles: ▪ Camber (tilt of the wheel inward or outward) ▪ Toe (direction wheels point in or out) ▪ Caster (steering stability angle) 4. Compare with Manufacturer Specifications ◦ The system compares current readings with standard values for that vehicle model. 5. Adjust the Steering Components ◦ Adjust tie rods to correct toe angle. ◦ Adjust suspension parts or struts to correct camber and caster where applicable. 6. Recheck the Alignment ◦ After adjustments, measurements are retaken to ensure all angles are within specification. 7. Test Drive the Vehicle ◦ The vehicle is driven to confirm it moves straight without pulling to one side. Conclusion Wheel alignment ensures proper tyre contact with the road, improves safety, reduces tyre wear, and enhances fuel efficiency. It should be checked regularly, especially after hitting potholes or replacing suspension parts. #🤔 Unknown Facts